UNTOOLED ARMS for FIXTURES, GAUGES or CUSTOM TOOL HOLDERS
Basic Tool Arm Models WITHOUT TOOL HOLDERS or AIR FITTINGS. Add Standard or Custom Tool Holders, Fixtures, Test Equipment, Etc.
EL-Series arms are meant to be used with electric tools or anything other than air tools. However, all EL-Series arms still require a shop air connection for the float cylinder. Our Air Cylinder gives you the smoothest float of any method and decades of life (more than 50,000,000 rundowns).The volume of air needed is very low, less than 0.03 CFM. A 1/4″ (6mm) ID hose, at 80 psi (5.5 bar) minimum, is more than enough capacity.
All of these arms are also available as Overhead Mount models. Simply add -OM to the end on any model number. Example; EL506-N-OM. See Downloads page for drawings of some OM models.
| MODEL # | DESCRIPTION | SPEC PAGE | MAX. VERT. TORQUE in-lbs (Nm) |
MAX. HORZ. TORQUE in-lbs (Nm) |
MAX. TOOL WEIGHT lbs(Kg) |
MAX. REACH in. (mm) |
STANDARD BASE INCLUDED | TOOL HOLDER INCLUDED |
|---|---|---|---|---|---|---|---|---|
| EL506-N | Standard Duty Untooled Arm for lighter tools and fixtures Click here to request CAD files |
EL506-N | 550 (62) | 275 (31) | 6 (2.7) | 36" (915) | 12 inch (B125-12) | NONE |
| EL306-N | A shorter version of model EL506-N with less reach for smaller work areas. 10.3" (261mm) Vertical Travel Click here to request CAD files |
EL306-N | 550 (62) | 275 (31) | 6 (2.7) | 24" (610) | 8 inch (B125-08) | NONE |
| EL806-N | Medium Duty Untooled Arm with more rigid Parallel Rack than the 506 Click here to request CAD files |
EL806-N | 800 (90) | 400 (45) | 6 (2.7) | 36" (915) | 12 inch (B125-12) | NONE |
| EL815-N | Heavy Duty Untooled Arm has a rigid Parallel Rack like the 806 with a larger Float Cylinder for higher tooling weights Click here to request CAD files |
EL815-N | 800 (90) | 400 (45) | 15 (6.8) | 36" (915) | 12 inch (B125-12) | NONE |
| EL315-N | A shorter version of our EL815-N for smaller work areas. 10.3" (261mm) Vertical Travel Click here to request CAD files |
EL315-N | 800 (90) | 400 (45) | 15 (6.8) | 24" (610) | 8 inch (B125-08) | NONE |
| EL1015-N-B125 | Extra Heavy Duty Untooled Arm has thick Parallels with Cross Ties for even more rigidity and a larger diameter Shoulder Pin and Bearings than the 815. Click here to request CAD files |
EL1015-N-B125 | 1,100 (125) | 600 (68) | 14 (6.3) | 36" (915) | 12 inch (B125-12) | NONE |
| EL1015-N-B250 | Same as EL1015-N above but with B250 Base Kit for extending the EL1015-N more than 12" from the mounting surface. B250-0 kit has Heavy Duty Base Plate with 2-1/2 npt threads and a 2-1/2 to 1-1/4 npt reducer. It is intended to make it convenient for customer to produce a robust mounting base simply by purchasing threaded pipe of the necessary lengths. See page 2 of SPEC PAGE for details. Click here to request CAD files |
EL1015-N-B250 | 1,100 (125) | 600 (68) | 14 (6.3) | 36" (915) | 0 inches (B250-0 Kit) | NONE |
| EL1025-N | The same Extra Heavy Duty Parallel Rack as EL1015 but with our largest float cylinder and balance controls added for 25 lb (11.4 Kg) tooling weight capacity. B250-0 kit has Heavy Duty Base Plate with 2-1/2 npt threads and a 2-1/2 to 1-1/4 npt reducer. It is intended to make it convenient for customer to produce a robust mounting base simply by purchasing threaded pipe of the necessary lengths. See page 2 of SPEC PAGE for details. Click here to request CAD files |
EL1025-N | 1,100 (125) | 600 (68) | 25 (11.4) | 36" (915) | 0 inches (B250-0 Kit) | NONE |